The TM73 Flail Mower by Del Morino, suitable for tractors ranging from 35 to 60 HP, is an ideal machine for maintaining field edges, trails, pastures, and clearing overgrown areas and brush.

If you need a flail mower, chances are you will want a heavy-duty flail mower, something tough enough to stand up to difficult conditions. While other manufacturers only offer light-duty machines for compact tractors, our mower features heavy-gauge steel, large, thick blades, and 3 belts in the drive system. Our flail mowers come fitted with a full set of “Y” blades which are designed for the versatility of cutting through tough brush while also offering a nice cut to any lawn or pasture.

With a working width of 6’-1”, it’s the perfect size for the bigger compact utility tractors as well as older farm utility tractors.

Other features of the TM73 Flail Mower include:

• Parking stand keeps the flail mower in the proper position for unmounting and mounting.
• Adjustable anti-scalp shoes protect blades and turf.
• Rear roller sets cutting height and leaves behind an attractive stripe pattern on lawns.
• 3 attachment points on the lower pins of the 3 point hitch allow mounting on multiple sizes of Category 1 tractors and also allow offsetting the flail mower to the left or right.
• Reversible mounting capability allows the mower to operate while driving in reverse, allowing material to be cut before it is run over by the tractor. This can be an especially handy feature when mowing down tough brush like multiflora rose and bush honeysuckle.

PTO shaft included. For cutting instructions, click here.

* The cutting height depends not only on the position of the roller but also on the inclination of the mower, which is controlled by the top link. The cutting heights listed in this table are measured when the mower is parallel to the ground.