Gathering Wheels for Ibex TX31 Balers (drawbar also required)
- Calculated at Checkout
Want to make sure that you maximize your harvest and pick up as much hay as possible? Gathering wheels are the tool for the job.
These wheels bolt onto the sides of your existing TX31 pickup and widen the pickup area from 31" to about 45". While we do not recommend using these gathering wheels in the hopes of baling a large windrow, they do allow you to bale a slightly larger windrow than the standard 31" width. Their ground-driven rotating action gently guides any loose crop on the sides of the windrow inward so that you don't leave good hay in the field.
Note: You cannot use these gathering wheels without a drawbar. The wheels extend to the front of the baler and will interfere with the rear wheels on your tractor if the baler is mounted using the 3 point hitch. If you don't already have a drawbar, we recommend getting the Full Gathering Wheel Kit which includes a drawbar.