Ibex
Y Blade for TX52, TS62, TM73, TL84, and TM62 Offset Flails (Anvil Mark)
- SKU:
- PSDMURC404DB
- MPN:
- URC404DB
- Shipping:
- Calculated at Checkout
Description
This is a replacement Y blade for the models listed below. Please check the mark on the blade. This is the blade with an anvil mark on the front of the blade. If your blades have an eagle mark, click here for the appropriate listing.
Please check your mower against this list before purchasing.
Fits the following models:
Ibex TX52 Flail Mower (Del Morino Flipper 132)
Ibex TS62 Flail Mower (Del Morino Flipper 158)
Ibex TM62 Hydraulic Offset Flail Mower (Del Morino Centurion Super 158)
Ibex TM73 Flail Mower (Del Morino Flipper 186)
Ibex TL84 Flail Mower (Del Morino Flipper 214)
Rated to cut up to 2" thick material.
Dimensions:
Width - top (mounting hole edge): 1.58"
Width - bottom (cutting edge): 2.23"
Hole diameter: 0.80"
Thickness: 0.32"
Height (measured at an angle, from cutting edge to top of mounting edge): 5"
Related Products
Y Blade for TX52, TS62, TM73, TL84, and TM62 Offset Flails (eagle mark)
Ibex
$7.99
This is a replacement Y blade for the models listed below. Please check the mark on the blade. This is the blade with an eagle mark on the front of the blade. If your blades have an anvil...
Blade Attachment Bolt for TX52, TS62, TM73, TL84
Ibex
$2.99
Blade attachment bolt for Y blades and hammer blades for these models:
Ibex TX52, TS62, TM73, TL84
Del Morino Flipper 132, 158, 186, 214
Note: for finish cut blades, use this bolt instead.
PTO Shaft for Ibex TX52, TS62, TM73, & TL84 Flail Mowers
Ibex
$339.00
Fits the following models:
Ibex TX52 Flail Mower (Del Morino Flipper 132)
Ibex TS62 Flail Mower (Del Morino Flipper 158)
Ibex TM73 Flail Mower (Del Morino Flipper 186)
Ibex TL84 Flail Mower (Del...
