null
Ibex

Ibex TX51 2 Wheel Rake

SKU:
FZRP2B
Condition:
New
Shipping:
Calculated at Checkout
  • Image 1 | TX51 | Hay and Forage | Raking Equipment | Wheel Rakes | Tractor Tools Direct | Subcompact Tractor | US
  • Ibex TX51 2 Wheel Rake
  • Image 2 | TX51 | Hay and Forage | Raking Equipment | Wheel Rakes | Tractor Tools Direct | Subcompact Tractor | US
  • Image 3 | TX51 | Hay and Forage | Raking Equipment | Wheel Rakes | Tractor Tools Direct | Subcompact Tractor | US
  • Image 4 | TX51 | Hay and Forage | Raking Equipment | Wheel Rakes | Tractor Tools Direct | Subcompact Tractor | US
$1,199.00

Description

Wheel rakes are the most economical choice for raking hay and pine straw. With few moving parts, they are mechanically simple and require very modest horsepower.

Description

The Ibex line of crop-driven wheel rakes are designed to provide a gentle, cost-effective solution for your hay and pine straw raking needs.

Wheel rakes are a simple and economical alternative to powered rakes. There are no requirements for a PTO or hydraulics. The rake is driven by contact with the crop being raked and the forward motion of your tractor.

Features:

  • Wheels are crop-driven with no PTO shafts, belts, or hydraulic motors to wear out
  • Operates at high ground speeds
  • 40 steel spring fingers per wheel provide a clean raking job
  • Lightweight and sized for subcompact and compact tractors

Tractor Compatibility & Specifications

Model Ibex TX51 2 Wheel Rake

Diameter of Wheels

4 ft 7 in (55 in)

Number of Fingers per Wheel

40

Working Width

4 ft 3 in (51 in)

Connection

Category 1, 3-Point Hitch

Weight

188 lbs

PTO

Crop Driven

Windrow Width

Varies

Grease Fittings

Yes

FAQ

Are these an appropriate rake for a mini round baler?

This rake is a great fit for our TX31 mini round balers. It is easy to make a windrow that is appropriately sized for the mini round baler’s smaller pickup. The TX51 is very affordable and gets the job done at minimal cost.

How long will these last?

These rakes can last a lifetime with proper maintenance and usage.

How does it ship and does it come assembled?

These wheel rakes are shipped via LTL freight with liftgate service and come secured on a custom built wooden pallet and require some assembly. They come with assembly instructions, however there are few parts and assembly is relatively simple. Our support team is also just a phone call or email away to help with any questions you may have.

How much maintenance is required?

Check the grease fittings, grease if needed, and check tines for damage and you will be good to go for years to come!

How does the warranty work?

All Ibex implements come with a two year defective parts replacement warranty. You can find full warranty details here.

Do you have parts on hand if needed?

We stock a wide variety of parts right here in our Indiana warehouse! Some of our parts are available for purchase directly on our website and you can always give us a call for assistance. We are happy to help get you what you need quickly. We offer expedited shipping as well, for those times you need a part as soon as possible.

How does the rake work if I don’t connect it to the tractor’s PTO?

The wheels of this rake contact the ground and forward motion causes them to rotate and move the hay over into a windrow.

Does it have an overload protection system?

Wheel rakes are extremely forgiving and don’t need any protection system as they are ground-driven and are operated by the forward momentum of the tractor. Proper operation and travel speeds are key to the longevity of this implement.

Will I need a tedder too or will it work as a tedder in a pinch?

Wheel rakes are best in dryer climates or if used in conjunction with a drum mower with a conditioning system. The conditioning system will fluff the hay right when it’s cut, which will help to dry the hay faster before it is put into a windrow. If you have very wet conditions or do not have a conditioning system on your mower and there is moisture trapped inside the windrow, you can turn the windrow over to expose trapped moisture by riding over the windrow again.

If the rake’s wheels contact the ground, does this mean it will tear up my field?

Although these rakes do contact the ground, their wheels will rotate with ground contact and forward momentum as long as the bearings are in good shape and properly lubricated. In addition, the rake itself is very light, and the tines of the wheels are made from spring steel, which means there will be very little resistance with the ground.

Does it make clean hay?

Wheel rakes produce more of a roped windrow unlike the fluffy windrow produced by a belt rake. Since they are ground-driven, they are not likely to leave any hay behind. They will pick up some dust and dirt, but much of the dirt will fall out while the hay is being tumbled inside the baler during the baling step. When deciding when the hay is ready to bale, you will want to keep in mind that the windrows are tighter and somewhat more likely to trap moisture.

 

Shipping

Crate Dimensions

Length

72"

Width

60"

Height

12"

Machine Weight

188 lbs

Ship Weight

260 lbs

Delivery Type Continental US

Pickup from Warehouse

FREE

Freight (Free Lift Gate Service)

Place in cart to calculate shipping.

Machine requires assembly.

View AllClose

Additional Information

Discounts:
5% off on all 2 implement purchases, 10% off on all 3 implement purchases
View AllClose

Other Customers Have Also Bought: