Ibex

This kit includes all hardware required to attach flail hammer blades on certain Ibex and Del Morino flail mowers. It consists of: One (1) bolt One (1) locking nut Two (2) lock washers This kit...

This stand fits all TX31 Mini round balers and comes with a heavy duty caster wheel to allow easy maneuvering of the baler when in storage.

This lift kit consists of two bottom plates and two adapter rings which attach to the bottom of the drums to increase the cutting height by approximately 1 3/8". Longer attachment bolts and medium...

Fits the following models (each take 3 v-belts): Ibex TX52 Flail Mower (Del Morino Flipper 132) Ibex TS62 Flail Mower (Del Morino Flipper 158) Ibex TM62 Hydraulic Offset Flail Mower (Del Morino...

Fits the following models: Ibex TX52 Flail Mower (Del Morino Flipper 132) Ibex TS62 Flail Mower (Del Morino Flipper 158) Ibex TM73 Flail Mower (Del Morino Flipper 186) Ibex TL84 Flail Mower (Del...

Fits Ibex TS51C and Galfre FR/G 130 drum mowers. Goes between the tractor and the 90 degree gearbox. Includes a slip clutch to prevent damage to the implement.

Fits Ibex TS51C and Galfre FR/G 130 drum mowers. Goes between the 90 degree gearbox and drum unit. Has an overrunning (one-way) clutch to prevent back-driving of the tractor when the PTO is turned...

This kit includes all hardware required to attach flail "Y" blades on certain Ibex and Del Morino flail mowers. It consists of: One (1) bolt One (1) locking nut Two (2) spacers Two (2) lock...

This kit adds approximately 1.25 inches of additional cutting height to Ibex TX45 Drum Mowers, model year 2019 and newer. It consists of:Eight (8) height spacersEight (8) longer boltsTwo (2)...

This kit adds approximately 1.25 inches of additional cutting height to TX45 Drum Mowers, model year 2018 and older. It consists of:Two (2) replacement lower discs that can accept the lift...

This is a replacement Y blade for the models listed below. Please check the mark on the blade. This is the blade with an eagle mark on the front of the blade. If your blades have an anvil...

Metering knife that follows the reverse threaded rod to meter the release of net wrap. Fits both Ibex and Abbriata mini round balers that wrap with net.

Blade Change Tool for Ibex TM67C and TS51C drum mowers.

Yellow protective curtain Fits: Ibex TS51C Drum Mower Galfre 105 & 130 Drum Mowers