Ibex
Y Blade for TX52, TS62, TM73, TL84, and TM62 Offset Flails (Anvil Mark) (NO LONGER AVAILABLE)
- SKU:
- PSDMURC404DB
- MPN:
- URC404DB
- Shipping:
- Calculated at Checkout
Description
This blade has an anvil mark on the front of the blade and has been discontinued. Click here to find the listing for the updated blade.
IMPORTANT NOTE: You cannot mix and match anvil mark and eagle mark blades, because the two have different weights and your rotor must be balanced. However, the new eagle mark blades are fully compatible with older models.
Related Products
Y Blade for TX52, TS62, TM73, TL84, and TM62 Offset Flails (eagle mark)
Ibex
$7.99
This is a replacement Y blade for the models listed below. Please check the mark on the blade. This is the blade with an eagle mark on the front of the blade. If your blades have an anvil...
PTO Shaft for Ibex TX52, TS62, TM73, & TL84 Flail Mowers
Ibex
$339.00
Fits the following models:
Ibex TX52 Flail Mower (Del Morino Flipper 132)
Ibex TS62 Flail Mower (Del Morino Flipper 158)
Ibex TM73 Flail Mower (Del Morino Flipper 186)
Ibex TL84 Flail Mower (Del...
Blade Attachment Bolt for TX52, TS62, TM73, TL84
Ibex
$3.99
Blade attachment bolt for Y blades and hammer blades for these models:
Ibex TX52, TS62, TM73, TL84
Del Morino Flipper 132, 158, 186, 214
Note: for finish cut blades, use this bolt instead.
Cutting Height Extension Kit for Ibex TX52, TS62, TM73, & TL84 Flail Mowers
Ibex
$99.00
This is a retrofit kit for older models of Ibex Ibex TX52, TS62, TM73, & TL84 flail mowers that came with shorter cutting heights. This kit raises the maximum cutting height to 4".