Ai2 Parts

These pads bolt directly to the bottom of the Ai2 XL Backhoe Stabilizer Feet and prevent the teeth from marring finished surfaces that you don’t want to damage, such as a concrete or asphalt driveway, or a similar type of surface. On soft ground...

This kit consists of the 3 pins that are installed into Kubota BX front loader attachments (these are not the pins that connect the Ai2 Quick Attach to the loader). Contents: 1x Center Pin (1 3/16") 2x Side Pin (3/4") 1x Center Pin Retaining Bolt 1x...

If you already have an Ai2 3-Pin Quick Attach for an older model Kubota BX tractor and have decided to upgrade to a new BX model, this hardware kit will allow you to make the switch at minimal cost. Newer Kubota BX models require different side pins and...

Contents: 2x P-Pin 2x D-Clip  

Dimensions: 1" thick x 3" wide x 36" long Weight: 45 lbs each Capacity per fork: 660 lbs

NOTE: Be sure to remove center lock pin before use! Easy to install and fits all Ai2 snow plows Cylinder made in Europe, mounting pins made in USA Contents: cylinder, 2x mounting pin, 2x mounting pin hardware Requires a 3rd function valve Does not come...